Interior Design Cost in Jeddah: What Shapes Your Budget in 2027

A design fee per square metre, a finishing rate that climbs with every step from porcelain to imported marble, joinery and fixings specified for the sea air, two majlis rooms, a terrace, a contingency and a construction market still edging upward: a guide to interior design cost in Jeddah, with current benchmark ranges in riyals, the decisions that move a budget and how to plan for prices in 2027.

Every Jeddah family planning a new interior asks how much it will cost, and the honest answer is a range. The range depends on decisions the family controls, such as the scope, the finish level, the share of bespoke joinery and imported stone and the pace of the programme, and on conditions it controls less, such as the age of the villa, the damp and salt an older home has absorbed and the direction of construction prices. Owners who understand those levers set a budget that holds from concept to handover.

The figures below are market benchmarks drawn from published Jeddah and Saudi finishing prices and official construction cost data, gathered in 2026. Every home differs, and Algedra prices each project against its own survey, drawings and specification, so treat these ranges as a planning tool and confirm the real figure with a priced proposal.

How a Jeddah Interior Budget Breaks Down

A complete Jeddah interior budget sits in four layers. Design covers the survey, concept, 3D visuals, detailed drawings to the Saudi Building Code and material schedules. Finishing and fit-out cover the build: services, gypsum ceilings, partitions, waterproofing, stone, joinery, painting and lighting. Furniture, fixtures and equipment cover loose and bespoke furniture, rugs, curtains, chandeliers, art and outdoor furniture for the terraces. Approvals and contingency cover the engineering office, Balady permits, compound or tower deposits and the reserve that protects the programme.

Comparing proposals across those four layers shows quickly whether two quotes price the same home, or whether one leaves a whole layer for later.

Interior Design Fees in Jeddah

Interior design fees in Saudi Arabia typically range from around SAR 100 to 400 per square metre, depending on the depth of service, the size of the home and the experience of the team. The lower end covers concept design and layouts for the owner to carry out, while the upper end covers full drawings, joinery details, MEP coordination, approvals drawings and site supervision for a villa or palace.

Design-and-build companies often fold part of the design fee into the fit-out contract, so the figure that matters is the total for the finished home, set against the drawings, revisions and supervision each proposal includes.

Finishing Rates per Square Metre in Jeddah

Published Jeddah finishing benchmarks for villas and apartments fall into three broad tiers:

•   Economy: around SAR 900 to 1,300 per square metre, suited to rental and investment apartments.

•   Standard: around SAR 1,300 to 1,900 per square metre, suited to comfortable family homes.

•   Luxury: around SAR 1,900 to 3,200 per square metre and above, suited to villas and premium residences.

Higher-end interiors across the Kingdom sit above those tiers. Published Saudi luxury fit-out benchmarks place structured luxury interiors with limited customisation at around SAR 3,000 to 4,500 per square metre, high-end bespoke interiors at around SAR 4,500 to 6,500, and ultra-luxury villas with custom joinery, imported furniture and advanced MEP at around SAR 6,500 to 10,000 and above.

Palaces and Grand Villas

Palaces in Al Hamra, Al Shati and Al Murjan sit at the top of the range. Double-height reception halls, coffered and domed ceilings, inlaid marble floors with medallions, carved timber and gypsum, timber lattice screens inspired by the rawasheen of Al-Balad, crystal chandeliers and furniture made to measure for each room push budgets into the bespoke and ultra-luxury tiers, and programmes often run in phases across a year or more.

What the Coast Adds to the Specification

Jeddah's humidity and salt air shape the specification, and the right materials cost more at the outset while saving repairs later. Moisture-resistant gypsum boards and joinery carcasses, engineered timber flooring, anti-mould paints, marine-grade 316 stainless steel for railings and fixings, PVD-coated hardware, powder-coated aluminium, sealed outdoor lighting and solution-dyed outdoor fabrics each carry a premium over standard equivalents, most of all in seafront homes along the corniche, in Al Murjan and around Obhur.

Air conditioning with dehumidification, larger terrace drains and raised thresholds add to the services budget, and older villas often need damp-proofing, concrete repairs and new waterproofing before any finish goes on, which belongs in the budget from the first estimate.

Majlis, Kitchens, Bathrooms and Terraces

Four parts of the house carry the largest share of a Jeddah budget. The men's and ladies' majlis set their cost through craft: coffered ceilings with concealed coves, feature walls in carved timber or book-matched marble, bespoke perimeter seating and chandeliers sized to each room. Most large households keep a show kitchen and a working kitchen, roughly doubling the kitchen line, and bathrooms multiply across a villa with six or more suites, so every choice between porcelain slab and imported marble repeats in each room.

Terraces, pool decks and outdoor majlis areas carry more weight in Jeddah than inland, with sealed stone, shade structures, outdoor kitchens, lighting and weather-resistant furniture forming a budget line of their own.

Apartments in Northern Obhur and the City

Apartments follow the same per-square-metre logic at a smaller scale, usually within the standard and luxury finishing tiers, with the spend concentrated in the kitchen, the bathrooms and the joinery. Seafront towers add marine-grade balcony fittings and careful sealing of sliding doors, while the building management adds a refundable deposit against damage. Joinery made in sections for the service lift and work kept to approved hours keep apartment costs predictable.

Engineering, Permits and Approvals

Permitted works in Jeddah run through Balady with a contract with a licensed engineering office, so the engineering office's fee for drawings and supervision belongs in the budget alongside the Balady service fees. Compounds and towers add their own deposits, and homes in Al-Balad add the specialist conservation work that heritage buildings require.

What Moves a Jeddah Budget Up or Down

•   Scope: a cosmetic refresh inside the existing layout costs a fraction of a renovation that moves walls, renews services and repairs damp and corroded concrete.

•   Stone and materials: natural marble costs around four times a quality local substitute, and imported finishes multiply quickly across large villas.

•   Bespoke furniture: custom furniture can add 20 to 50 percent to a project's total, while well-chosen ready-made pieces hold the budget.

•   Location and exposure: seafront homes carry a heavier coastal specification than villas further inland.

•   Age and condition: older villas reveal hidden damp, salt and corrosion once plaster comes off and floors open.

•   Programme pace: rushed programmes add overtime, expedited deliveries and priority sourcing, while early decisions protect the budget.

Escalation: Planning for Prices in 2027

Saudi construction costs rose steadily through 2026. The General Authority for Statistics reported its construction cost index up 2.3 percent year on year in August 2026, with residential costs up 2.1 percent, equipment and machinery rental up around 4 percent and energy up 3 percent, while timber and joinery rose close to 4 percent in July as logistics disruption across the region fed through to imported inputs.

For a project starting in 2027, a sensible plan adds around 3 to 5 percent escalation to quotes priced in 2026, holds a contingency of 10 to 15 percent, and locks prices for long-lead items such as marble, chandeliers, imported fittings and outdoor furniture as early as the design allows.

A Worked Example: A 600 Square Metre Jeddah Villa

Take a five to six-bedroom villa in Al Shati or Al Naeem with around 600 square metres of interior area, finished to the luxury tier with a men's and a ladies' majlis, two kitchens, six bathrooms and a furnished terrace. At SAR 1,900 to 3,200 per square metre, the finishing lands at around SAR 1.14 to 1.92 million. Design at SAR 100 to 400 per square metre adds around SAR 60,000 to 240,000. A contingency of 10 to 15 percent adds around SAR 114,000 to 288,000, and a 2027 start adds a further 3 to 5 percent for escalation. Furniture, rugs, curtains and art sit on top, and bespoke pieces can add 20 to 50 percent to the total.

Families with a home in the capital as well will find the Riyadh benchmarks in our guide to Riyadh interior design costs, which help when budgeting two projects side by side.

How to Get an Accurate Quote in Jeddah

An accurate quote starts with an accurate brief. Share the villa's or apartment's area, its age and building permit, the list of rooms and terraces in scope and a few images of the finish level the family likes. A measured survey, including a damp and salt check for older homes, and a concept stage turn that brief into drawings, and a bill of quantities priced against those drawings gives a figure that holds. Our guide to vetting an interior design company in Jeddah sets out the checks that make a comparison fair.

Plan Your Jeddah Budget With Algedra

Separate the four layers, give the majlis, kitchens, bathrooms and terraces the budget they need, specify for the coast from the start, allow for escalation and contingency and lock long-lead items early, and a Jeddah interior budget stays on track from concept to handover. Our Saudi Arabia interior design services page sets out how Algedra's designers, architects and engineers carry villas, palaces and apartments in Jeddah and across the Kingdom.

Fill out our Jeddah budget form with your district, property type, interior area and the rooms you have in mind, and one of our senior designers will reply with a realistic budget range and the next steps.

Interior Design Cost in Jeddah: Frequently Asked Questions

How much does villa finishing cost in Jeddah per square metre?

Published Jeddah benchmarks place finishing at around SAR 900 to 1,300 per square metre for economy work, SAR 1,300 to 1,900 for standard and SAR 1,900 to 3,200 and above for luxury villas and premium residences.

How much do interior designers charge in Jeddah?

Interior design fees in Saudi Arabia typically range from around SAR 100 to 400 per square metre, depending on the depth of service, the size of the home and the experience of the team.

What does a bespoke luxury interior cost in Saudi Arabia?

Published Saudi benchmarks place high-end bespoke interiors at around SAR 4,500 to 6,500 per square metre and ultra-luxury villas with custom joinery and imported furniture at around SAR 6,500 to 10,000 and above.

Do seafront homes in Jeddah cost more to fit out?

Seafront homes carry a heavier coastal specification, with moisture-resistant boards, marine-grade stainless steel, coated aluminium, sealed outdoor lighting and dehumidification, which adds cost at the outset and saves repairs later.

Will interior design costs in Jeddah rise in 2027?

Saudi construction costs rose around 2 to 3 percent year on year through 2026. Adding around 3 to 5 percent escalation to 2026 quotes and holding a 10 to 15 percent contingency gives a safer budget for 2027.

Does Algedra give fixed quotes in Jeddah?

Algedra prices each project against its own survey, drawings and specification, and shares a realistic budget range at the first meeting before a detailed priced proposal.